M74HCT574B1R

M74HCT574B1R Overview

20-DIP (0.300, 7.62mm)is the packaging method. Package Tubeembeds it. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. Through Holeis occupied by this electronic component. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74HCTseries of FPGAs. You should not exceed 50MHzin its output frequency. In total, it contains 1 elements. There is 4μA quiescent consumption. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The M74HCT574 family contains it. The power supply voltage is 5V. Its input capacitance is 5pFfarads. It is a member of the HCTfamily of D flip flop. In this case, the electronic component is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. This flip flop is designed with 8 Bits. Due to its superior flexibility, it uses 8 circuits. The system runs on a power supply of 5V watts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. In order to operate, the chip has 3 output lines.

M74HCT574B1R Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

M74HCT574B1R Applications

There are a lot of STMicroelectronics M74HCT574B1R Flip Flops applications.

• Power down protection
• Patented noise
• QML qualified product
• Supports Live Insertion
• Modulo – n – counter
• Count Modes
• Latch-up performance
• Memory
• Event Detectors
• Computers