MAX1253BEUE+

MAX1253BEUE+ Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 94k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The architecture that analogue to digital converter's core adopts is Pipelined.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX1253 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Analog, Digital, Dual.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.8 inputs are employed.It operates with the minimal supply voltage of 2.7V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 6.6mW.The number of channels is growing strong/weak: 10.The conversion rate of this electrical AD converter is calculated as 94 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. Temperature Sensor can be ensured when operating.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this device employs.The reference voltage amounts to 2.5V.

MAX1253BEUE+ Features

1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V

MAX1253BEUE+ Applications

There are a lot of Maxim Integrated MAX1253BEUE+ ADC applications.

• Displaying
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Spectrum Analysis
• Data Acquisition Systems
• Scientific instruments.
• Automotive
• Cell Phones
• 3-phase power control
• AC motor control
• In-building wireless telephony