MAX16002BTC+

MAX16002BTC+ Overview

As you can see, this power management is mounted through 12 terminals. Tube-packaging is used. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 4 channels. In this IC management you will find 12-WQFN Exposed Pad functions for you to refer to. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 3.3V. When 4 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 12 pins on the board. 12 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 50μA. The other features include, for example, [0], which is just one example. It is always advisable to use MAX16002, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management must be powered by 2.5/5V volts to function properly.

MAX16002BTC+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current

MAX16002BTC+ Applications

There are a lot of Maxim Integrated MAX16002BTC+ Voltage Supervisors applications.

• Radio
• Medical-specific insulation monitor
• Leakage protection
• Unattended substation automation
• DSP
• Embedded computing
• DVR
• Battery-powered equipment
• Cloud computing
• Precision measurement