MAX16002ETC+T

MAX16002ETC+T Overview

Power management is mounted through 12 terminals. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 4 channels. To assist you, this PMIC includes 12-WQFN Exposed Pad functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. In a 3.3V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 4. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 12 pins on the board. There are 12 pins on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The power management's supply current is 50μA. Additionally, IC management are a variety of features, for example [0], to name a few. You can always use MAX16002, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 2.5/5V power to power this power management.

MAX16002ETC+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current

MAX16002ETC+T Applications

There are a lot of Maxim Integrated MAX16002ETC+T Voltage Supervisors applications.

• Military electronics
• Utility meter
• Electrical fire monitoring system
• emergency room
• Functional modules
• Embedded computing
• Satellite navigation
• Transformer load monitoring equipment
• Smartphones
• Refrigeration