MAX16020PTET+T

MAX16020PTET+T Overview

There are 16 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 16-WQFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of NOT SPECIFIED is specified for the package. In a 1.62V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 16 pins. Power managment ic pin count is 16. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. A similar IC managements number of the manufacturer can always be found by using MAX16020, the base power ics number.

MAX16020PTET+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 0V

MAX16020PTET+T Applications

There are a lot of Maxim Integrated MAX16020PTET+T Voltage Supervisors applications.

• Detection of phase imbalance
• Precision measurement
• Urban rail transit weak current power monitoring
• Smart meter
• Digitally controlled LDO regulators circuit
• Microcontroller system
• Leakage current detection
• Detection of phase loss
• Power distribution systems of ICU
• Power distribution systems of operating room