MAX16029TG+T

MAX16029TG+T Overview

There are 24 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 4 channels which are available in a series format. There are 24-WFQFN Exposed Pad functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Sequencer manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. Power ics operate at 4 supply voltages. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 24 pins on the board. Power managment ic pin count is 24. There should be a minimum voltage supply (Vsup) of 2.2V for this PMIC. This IC power should be powered by no more than 28V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The power management's supply current is 52μA. A similar IC managements number of the manufacturer can always be found by using MAX16029, the base power ics number.

MAX16029TG+T Features

Sequencer type
Minimum supply voltage of 2.2V
52μA operating supply current

MAX16029TG+T Applications

There are a lot of Maxim Integrated MAX16029TG+T Voltage Supervisors applications.

• Set top box
• Personal computers
• Utility meter
• Radio
• Automotive permanent magnet synchronous motors
• Smartphones
• Satellite navigation
• Functional modules
• Efficient information transmission
• Sensitive sensors