MAX16057ATT31+T

MAX16057ATT31+T Overview

As you can see, this power management is mounted through 6 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 6-WDFN Exposed Pad functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. 6 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 125nA. A similar IC managements number of the manufacturer can always be found by using MAX16057, the base power ics number.

MAX16057ATT31+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
125nA operating supply current

MAX16057ATT31+T Applications

There are a lot of Maxim Integrated MAX16057ATT31+T Voltage Supervisors applications.

• Electronics installed in the vehicle
• Multi-voltage system
• WiFi router
• Solar power charger
• Dash board
• Fire equipment power monitoring system
• Stable power system
• Transformer load monitoring equipment
• Power distribution systems of operating room
• Medical-specific insulation monitor