MAX16059ATT33+T

MAX16059ATT33+T Overview

A total of 6 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 6-WDFN Exposed Pad functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. A supply voltage of 3.3V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. There are 6 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. A similar IC managements number of the manufacturer can always be found by using MAX16059, the base power ics number.

MAX16059ATT33+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V

MAX16059ATT33+T Applications

There are a lot of Maxim Integrated MAX16059ATT33+T Voltage Supervisors applications.

• Urban rail transit weak current power monitoring
• Automotive power systems
• FPGA design
• Battery cars
• Insulation fault location system
• Digitally controlled LDO regulators circuit
• Power communication system
• Electric heating appliances
• Embedded computing
• Smartphones