MAX16060ATE+

MAX16060ATE+ Overview

There are 16 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 4 channels that can be found. To assist you, this PMIC includes 16-WQFN Exposed Pad functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. In a 3.3V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 4. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 16 pins on the board. Power managment ic pin count is 16. IC management can only work with a supply voltage of 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 45μA. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using MAX16060, the base power ics number. A power supply of 2.5/5V watts is required for the operation of this power management.

MAX16060ATE+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
45μA operating supply current

MAX16060ATE+ Applications

There are a lot of Maxim Integrated MAX16060ATE+ Voltage Supervisors applications.

• Set top box
• Power distribution systems of infant care room
• Military electronics
• emergency room
• Radio
• Automotive permanent magnet synchronous motors
• Satellite navigation
• Battery cars
• Household appliances
• Detection of phase sequence