MAX16072RS29D0+T

MAX16072RS29D0+T Overview

This power management consists of 4 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). Please refer to power management for 4-WFBGA, CSPBGA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. 4 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16072, which is the base power ics number. The IC power that you are looking at comes from our well-known nanoPower series product line.

MAX16072RS29D0+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

MAX16072RS29D0+T Applications

There are a lot of Maxim Integrated MAX16072RS29D0+T Voltage Supervisors applications.

• DSP
• Low voltage/high power - AI, GPU
• Rechargeable batteries
• Refrigeration
• Microprocessor system
• Personal computers
• Kitchen appliances
• Transformer load monitoring equipment
• Medical-specific isolation transformer
• Radar