MAX17535ETG+

MAX17535ETG+ Overview

It is contained in the package Tube.The package 24-WFQFN Exposed Pad includes a version of it.A Surface Mount mounting type is assigned to the device.The best way to adjust the temperature is to set it to -40°C~85°C TA.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.To charge the device, a current of Constant - Programmable is required.This device's related parts can be found under the base part number MAX17535.A total of 24 terminations can be found in it.It is 16.8V for the battery pack.There are 24 pins on it, so it has a very simple design.The charging current of the part is 7A at maximum.There are 20 pins necessary to make it work.The system currently provides 4 channels for the user to use.It should be possible to run it from a 19V battery it should be able to run at all times.The output current is set to 7mA in this case.This device is classified as Power Management Circuits under the subcategory.As far as the mounting is concerned, it is mounted in the way of Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 2.5mA.The part's power supply is set to 5V.The gadget's supply is running at 1.5mA volts.It is recommended to set the supply voltage to 26V in order to maximize the efficiency of the system.During normal operation, Vsup should remain above 8V.

MAX17535ETG+ Features

Battery pack voltage of 16.8V
4 channels
Power Management Circuits subcategory
24-WFQFN Exposed Pad package

MAX17535ETG+ Applications

There are a lot of Maxim Integrated MAX17535ETG+ Battery Chargers ICs applications.

• Laptops
• Portable speaker systems
• Instruments and meters
• TV sticks
• Electric boat
• Industrial handhelds
• Personnel carriers
• Remote sensor
• Electric tour bus
• Rental fleets