All Products

MAX4091ASA

1 Channels 20nA 71 dB Instrumentational OP Amps 0.2μA 3V 2.7V~6V ±1.35V~3V MAX4091 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX4091ASA
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 554
  • Description: 1 Channels 20nA 71 dB Instrumentational OP Amps 0.2μA 3V 2.7V~6V ±1.35V~3V MAX4091 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Published 2002
Series Beyond-the-Rails™
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Max Power Dissipation 471mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number MAX4091
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 3V
Power Supplies 3/5V
Number of Channels 1
Operating Supply Current 130μA
Nominal Supply Current 185μA
Slew Rate 0.2V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 71 dB
Current - Input Bias 20nA
Voltage - Supply, Single/Dual (±) 2.7V~6V ±1.35V~3V
Input Offset Voltage (Vos) 30μV
Bandwidth 500 kHz
Unity Gain BW-Nom 500 kHz
Voltage Gain 115dB
Average Bias Current-Max (IIB) 0.2μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Low-Bias NO
Micropower YES
Programmable Power NO
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant

MAX4091ASA Overview


There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 30μV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 130μA and 10 . 115dB should remain the voltage gain. 1 channels are available on the instrumentation amplifier. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 3V. In this case, Beyond-the-Rails? represents the instrumentation amplifiers' series number.

MAX4091ASA Features


8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail

MAX4091ASA Applications


There are a lot of Maxim Integrated MAX4091ASA Instrumentational OP Amps applications.

  • Cinema or auditorium audio system
  • Thermocouples
  • Tablets
  • Oscilloscopes
  • ECG equipment
  • Test equipment
  • Scintillation detectors
  • Video data acquisition
  • Radiation thermometry transducers
  • single/dual op amp sum and difference circuits