MAX4210BEUA

MAX4210BEUA Overview

There is an inclusion of buck boost converter in the package Tube.In this case, voltage regulator has been packaged in the same way as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In this case, Surface Mount holds the current regulator in place.There should be no temperature above -40°C~85°C at the time of operation.Current regulator supports the input voltage of 4V~28V.8 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.Among the MAX4210 family of products.When a computer or other communication constant current regulator has 8 pins, these are pronged contacts.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.The analog IC used in this power converter is POWER SUPPLY SUPPORT CIRCUIT.There is a strong/weak growth in the number of channels: 1.As long as 5.5V is supplied with the maximal voltage, the buck boost converter will work.The current regulations of this part are included in a part that is named Power Management Circuits.With the minimal supply voltage of 2.7V, it is capable of operating.As soon as 380μA reaches the operating supply current, the boost converter begins to operate.It reaches 0.67mA when the maximum supply current (Isup) is supplied to it for current regulation's operation.A 3/5V power supply is used to power the boost converter.

MAX4210BEUA Features

Tube package
MAX4210 family
The maximal supply voltage of 5.5V
3/5V power supplies

MAX4210BEUA Applications

There are a lot of Maxim Integrated MAX4210BEUA Current Regulation/Managements applications.

• Over current monitor
• Industrial applications current measurement
• Battery chargers
• DC-to-dc converters
• Diesel injection controls
• Suspension controls
• Motor controls
• Transmission controls
• Over-current measurement
• Vehicle dynamic controls