MAX4427MJA/883B

MAX4427MJA/883B Overview

For greater flexibility, the 8-CDIP (0.300, 7.62mm) package is adopted.Tube is the form of the package.There are 2 drivers installed for this device.Ideally, it should be mounted in the direction of Through Hole.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -55°C~125°C TA.Non-Inverting is the input type used in this program.Mosfet driver is based on 8 terminations.In this case, Through Hole indicates how the device is to be mounted.A total of 8 pins are available on the device.With a supply voltage of 15V, it is designed to operate.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.In the maximum case, the output current can be 1.5A volts.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has 8 component pins.Based on the maximum power dissipation of 640mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.The gate driver belongs to the Military, MIL-STD-883 series.

MAX4427MJA/883B Features

Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 640mW
Operating with the supply voltage of Military, MIL-STD-883

MAX4427MJA/883B Applications

There are a lot of Maxim Integrated MAX4427MJA/883B gate drivers applications.

• Line drivers
• Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
• DC/DC converters
• General Purpose 3-Phase Inverter
• Active Clamp Flyback or Forward and Synchronous Rectifier
• Solar inverters
• Commercial and agricultural vehicles (CAV)
• serial peripheral interface (SPI), I2C
• High power buffers
• Portable computers