MAX5988AETP+T

MAX5988AETP+T Overview

It is embedded in the Tape & Reel (TR) package.It is packaged in a way that resembles 20-WFQFN Exposed Pad.PoE controllers of this type are called Controller (PD), DC/DC.There is an increase in the number of channels strong/weak as follows: 1.Reliability is ensured by operating PoE at -40°C~85°C.This electrical Po E controller requires a voltage supply of 8.8V~60V to operate.According to the base part number MAX5988, its Po E controllers can be founded.In a 20 termination, the transmission line is terminated with a power over ethernet controller that matches its characteristic impedance.It has a maximum power of 6.49W Watts.There is a supply current of 3.3mA in the system.Power Management Circuits includes this Po E controller in its package.There is a 20 pin design on this board.A voltage higher than 48V should be applied to the supply.During its operation, Isup reaches 4.5mA, the maximum current.Surface Mount is the direction it is mounted.It operates from 48V power supplies.With its maximum design flexibility, 12.6mA boasts one of the highest output currents on the market.This power over ethernet controller has an output voltage that is equal to 5.6V.As far as the input voltage of this power over ethernet PoE controller is concerned, it has a maximum value of 60V.An power over the ethernet controller such as this requires a minimum voltage of 8.8V.

MAX5988AETP+T Features

Tape & Reel (TR) package
20 pins
48V power supplies
The output current of 12.6mA

MAX5988AETP+T Applications

There are a lot of Maxim Integrated MAX5988AETP+T Power Over Ethernet (PoE) Controllers applications.

• Routers
• POS Terminals
• Power over Ethernet
• Higher Power Ethernet Powered Devices
• PoE powered device appliances
• Public Information Displays
• Industrial Automation Equipment
• WLAN Access Points
• Commercial Information Displays
• Non-Compliant, Application Specific Devices