MAX6301CUA+

MAX6301CUA+ Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tube. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. This power ic can be sub-categorized as Power Management Circuits. A total of 8 pins are located on this power management. The pins of the power management system count 8. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6301, which is the base power ics number. It requires 2/5.5V watts of power to operate this voltage supervisor.

MAX6301CUA+ Features

Simple Reset/Power-On Reset type

MAX6301CUA+ Applications

There are a lot of Maxim Integrated MAX6301CUA+ Voltage Supervisors applications.

• Set top box
• Military electronics
• Dash board
• Magnetic resonance imaging
• Electronics installed in the vehicle
• DSP
• Kitchen appliances
• Microcontroller system
• Consumer electronics
• Power communication system