MAX6314US28D2+T

MAX6314US28D2+T Overview

A total of 4 terminals are used to mount this power management. A Strip package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find TO-253-4, TO-253AA functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 4. The pins of the power management system count 4. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Bidirectional from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 5μA is the recommended value.

MAX6314US28D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5μA operating supply current

MAX6314US28D2+T Applications

There are a lot of Maxim Integrated MAX6314US28D2+T Voltage Supervisors applications.

• Rechargeable batteries
• DC stabilized power supply module
• Battery-powered equipment
• Kitchen appliances
• Military electronics
• Consumer electronics
• Functional modules
• Fire equipment power monitoring system
• Smart meter
• Power distribution systems of ICU