MAX6322HPUK29A-T

MAX6322HPUK29A-T Overview

This power management consists of 5 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 245. Manage ics operate at 3V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. Pin count of the power management is 5. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Open Drain, Push-Pull of output voltage. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. You can always use MAX6322, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6322HPUK29A-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MAX6322HPUK29A-T Applications

There are a lot of Maxim Integrated MAX6322HPUK29A-T Voltage Supervisors applications.

• Precision measurement
• Dash board
• Digitally controlled LDO regulators circuit
• Important electronics for automotive protection
• Analog circuit
• Utility meter
• Display equipment
• Low voltage/high power - AI, GPU
• Satellite navigation
• DSP