MAX6324AUT31+T

MAX6324AUT31+T Overview

A total of 6 terminals are used to mount this power management. In terms of packaging, power management follows the Strip model. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. There are SOT-23-6 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Watchdog Circuit products. When 3V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. There are a total of 6 pins on power management. This power management has 6 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a supply current of 27μA for the power management.

MAX6324AUT31+T Features

Watchdog Circuit type
Minimum supply voltage of 1.2V
27μA operating supply current

MAX6324AUT31+T Applications

There are a lot of Maxim Integrated MAX6324AUT31+T Voltage Supervisors applications.

• Important electronics for automotive protection
• Cloud computing
• Magnetic resonance imaging
• emergency room
• Medical-specific isolation transformer
• Transformer load monitoring equipment
• Embedded computing
• Set top box
• Microcontroller system
• Electric heating appliances