MAX6335US16D3-T

MAX6335US16D3-T Overview

It is mounted through 4 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. IC management conducts in a 3V-voltage supply. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 4 pins are located on this power management. 4 pins make up the power management. It is recommended that Vsup should not be less than 1.2V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 3.3μA. For similar manage ics search of the manufacturer, you can always refer to MAX6335, the base PMIC number.

MAX6335US16D3-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.3μA operating supply current

MAX6335US16D3-T Applications

There are a lot of Maxim Integrated MAX6335US16D3-T Voltage Supervisors applications.

• Battery cars
• Network equipment
• Fire equipment power monitoring system
• Data storage applications
• Analog circuit
• Military electronics
• Important electronics for automotive safety
• Radio
• Medical-specific isolation transformer
• Refrigeration