MAX6335US23D3+T

MAX6335US23D3+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes TO-253-4, TO-253AA functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 3V. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 4 pins on IC management. This power management has 4 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 3.3μA. You can always use MAX6335, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6335US23D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.3μA operating supply current

MAX6335US23D3+T Applications

There are a lot of Maxim Integrated MAX6335US23D3+T Voltage Supervisors applications.

• emergency room
• Leakage protection
• Functional modules
• Power communication system
• Computer applications
• Consumer electronics
• Multi-voltage system
• Set top box
• DSP
• Electric heating appliances