MAX6336US25D3+T

MAX6336US25D3+T Overview

Power management is mounted through 4 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 4. This power management system has 4 pins. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 3.3μA. You can always use MAX6336, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6336US25D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.3μA operating supply current

MAX6336US25D3+T Applications

There are a lot of Maxim Integrated MAX6336US25D3+T Voltage Supervisors applications.

• Functional modules
• Analog circuit
• Smart meter
• Medical-specific insulation monitor
• Detection of phase sequence
• Radar
• Important electronics for automotive safety
• Refrigeration
• Power distribution systems of operating room
• emergency room