MAX6337US24D3-T

MAX6337US24D3-T Overview

It is mounted through 4 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 245. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 4 pins in it. Pin count of the power management is 4. IC management can only work with a supply voltage of 1.2V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 3.3μA. To find similar IC managements from the manufacturer, you can always search by MAX6337.

MAX6337US24D3-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.3μA operating supply current

MAX6337US24D3-T Applications

There are a lot of Maxim Integrated MAX6337US24D3-T Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• DVR
• Magnetic resonance imaging
• Smart meter
• WiFi router
• Urban rail transit weak current power monitoring
• Network equipment
• Satellite navigation
• Military electronics
• Detection of phase imbalance