MAX6361LUT44+T

MAX6361LUT44+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. A Strip package is used to package the power management. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 2 channels. In this PMIC, you can find SOT-23-6 functions for your reference. There are a lot of similarities between this IC management and other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 2.38V volt supply. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 6. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 15μA. There are other features such as MANUAL RESET INPUT, WATCHDOG INPUT to name a few. The power management must be powered by 2.5/5V volts to function properly.

MAX6361LUT44+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6361LUT44+T Applications

There are a lot of Maxim Integrated MAX6361LUT44+T Voltage Supervisors applications.

• FPGA design
• Important electronics for automotive safety
• Leakage current detection
• Fire equipment power monitoring system
• Military electronics
• Functional modules
• Rechargeable batteries
• Personal computers
• Dash board
• Smartphones