MAX6365HKA29+T

MAX6365HKA29+T Overview

This power management consists of 8 mounting terminals on which it can be mounted. There is a Strip-packaging method applied to IC management. Power management is possible to find a series of 1 functions. A series of 2 channels can be found on this supervisor. In this PMIC, you can find SOT-23-8 functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2.8V supply voltages. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 15μA. As well as this, there are other features to mention such as [0], for example. The voltage supervisor requires a power source of 2.5/5V volts in order to work correctly.

MAX6365HKA29+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6365HKA29+T Applications

There are a lot of Maxim Integrated MAX6365HKA29+T Voltage Supervisors applications.

• Microcontroller system
• Utility meter
• External alarm
• Power communication system
• Refrigeration
• Low voltage/high power - AI, GPU
• Electronics installed in the vehicle
• Microprocessor system
• Smart meter
• Battery cars