MAX6377UR31+T

MAX6377UR31+T Overview

There are 3 terminals connected to this power management, which makes it easy to mount. There is a Strip-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 3V-voltage supply. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. A total of 3 pins are located on this power management. Pin count of the power management is 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 1μA volt supply current.

MAX6377UR31+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current

MAX6377UR31+T Applications

There are a lot of Maxim Integrated MAX6377UR31+T Voltage Supervisors applications.

• Battery cars
• Power communication system
• Urban rail transit weak current power monitoring
• Military communications
• Utility meter
• Electronics installed in the vehicle
• Battery cars
• Radar
• Important electronics for automotive protection
• Automotive permanent magnet synchronous motors