MAX6379XR44+T

MAX6379XR44+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. In terms of packaging, power management follows the Strip model. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SC-70, SOT-323 functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 3 pins on the board. 3 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a supply current of 1μA for the power management.

MAX6379XR44+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current

MAX6379XR44+T Applications

There are a lot of Maxim Integrated MAX6379XR44+T Voltage Supervisors applications.

• FPGA design
• Efficient information transmission
• Medical-specific insulation monitor
• Detection of phase sequence
• Battery cars
• Embedded computing
• emergency room
• Computer applications
• Smart meter
• Urban rail transit weak current power monitoring