MAX6381LT22D1+T

MAX6381LT22D1+T Overview

There are 6 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 6-WDFN functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 1.8V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. There are a total of 6 pins on power management. There are 6 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. It is always advisable to use MAX6381, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6381LT22D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT22D1+T Applications

There are a lot of Maxim Integrated MAX6381LT22D1+T Voltage Supervisors applications.

• Precision measurement
• Refrigeration
• Microprocessor system
• Automotive power systems
• Leakage current detection
• Low voltage/high power - AI, GPU
• Power distribution systems of operating room
• Power communication system
• Radar
• Smart meter