MAX6381LT25D4+T

MAX6381LT25D4+T Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of 6-WDFN functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 1.8V supply voltages. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 6 pins that are attached to IC management. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 7μA is the recommended value. It is always advisable to use MAX6381, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6381LT25D4+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT25D4+T Applications

There are a lot of Maxim Integrated MAX6381LT25D4+T Voltage Supervisors applications.

• Multi-voltage system
• Embedded computing
• Detection of phase sequence
• Efficient information transmission
• Smartphones
• Medical-specific insulation monitor
• Microprocessor system
• Power communication system
• Leakage protection
• Cloud computing