MAX6381LT46D2+T

MAX6381LT46D2+T Overview

Power management is mounted through 6 terminals. Power management is packaged in a Tape & Reel (TR) way. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. There are 6-WFDFN functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.8V. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 6 pins that are attached to IC management. Power managment ic pin count is 6. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.

MAX6381LT46D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT46D2+T Applications

There are a lot of Maxim Integrated MAX6381LT46D2+T Voltage Supervisors applications.

• Embedded computing
• Military electronics
• Refrigeration
• Functional modules
• Unattended substation automation
• Leakage protection
• Precision measurement
• Display equipment
• Power distribution systems of operating room
• Insulation fault location system