MAX6382XR29D3-T

MAX6382XR29D3-T Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-70, SOT-323 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 245. IC management conducts at a voltage of 1.8V. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. 3 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. You can always use MAX6382, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6382XR29D3-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6382XR29D3-T Applications

There are a lot of Maxim Integrated MAX6382XR29D3-T Voltage Supervisors applications.

• Transformer load monitoring equipment
• Leakage protection
• DC stabilized power supply module
• Efficient information transmission
• Battery cars
• DSP
• Analog circuit
• Detection of phase sequence
• Power communication system
• Power distribution systems of operating room