MAX6382XR44D6-T

MAX6382XR44D6-T Overview

There are 3 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-70, SOT-323 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 245 for the package during reflow. IC management conducts at a voltage of 1.8V. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. It has a total of 3 pins that are attached to IC management. 3 pins are present on the power management system. IC management can only work with a supply voltage of 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. It is always advisable to use MAX6382, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6382XR44D6-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6382XR44D6-T Applications

There are a lot of Maxim Integrated MAX6382XR44D6-T Voltage Supervisors applications.

• Consumer electronics
• DC stabilized power supply module
• Data storage applications
• Urban rail transit weak current power monitoring
• Insulation fault location system
• Microprocessor system
• Sensitive sensors
• emergency room
• Analog circuit
• Solar power charger