MAX6383XR16D6+T

MAX6383XR16D6+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Strip. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-70, SOT-323 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1.8V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. 3 pins are present in total in this power management. 3 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a 7μA supply current present in the power management.

MAX6383XR16D6+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6383XR16D6+T Applications

There are a lot of Maxim Integrated MAX6383XR16D6+T Voltage Supervisors applications.

• WiFi router
• Rechargeable batteries
• Satellite navigation
• Radar
• emergency room
• Magnetic resonance imaging
• Automotive power systems
• Consumer electronics
• Detection of phase imbalance
• Detection of phase loss