MAX6386LT29D3+T

MAX6386LT29D3+T Overview

There are 6 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 6-WFDFN functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 1.8V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 6 pins. There are 6 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~125°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6386, the base power ics number.

MAX6386LT29D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6386LT29D3+T Applications

There are a lot of Maxim Integrated MAX6386LT29D3+T Voltage Supervisors applications.

• Insulation fault location system
• Rechargeable batteries
• Stable power system
• DSP
• FPGA design
• Electric heating appliances
• Medical-specific insulation monitor
• Unattended substation automation
• Power distribution systems of ICU
• Microcontroller system