MAX6389LT46D3+T

MAX6389LT46D3+T Overview

It is mounted through 6 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 6-WFDFN functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.8V volt supply. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 6 pins on power management. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 7μA. You can always use MAX6389, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6389LT46D3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current

MAX6389LT46D3+T Applications

There are a lot of Maxim Integrated MAX6389LT46D3+T Voltage Supervisors applications.

• Battery cars
• Microprocessor system
• Detection of phase sequence
• Functional modules
• DC stabilized power supply module
• FPGA design
• Network equipment
• Leakage current detection
• Leakage protection
• Consumer electronics