MAX6389XS22D2+T

MAX6389XS22D2+T Overview

As you can see, this power management is mounted through 4 terminals. There is a Strip-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-82A, SOT-343 functions for you to refer to. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.8V. IC management is possible to find a succession of 2 voltages that have been checked. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 4 pins are located on this power management. 4 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 7μA.

MAX6389XS22D2+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current

MAX6389XS22D2+T Applications

There are a lot of Maxim Integrated MAX6389XS22D2+T Voltage Supervisors applications.

• Personal computers
• WiFi router
• Electrical fire monitoring system
• Set top box
• Refrigeration
• Power distribution systems of operating room
• Multi-voltage system
• Rechargeable batteries
• Electronics installed in the vehicle
• Medical-specific insulation monitor