MAX6392KA31+T

MAX6392KA31+T Overview

There are 8 terminals connected to this power management, which makes it easy to mount. Strip-packaging is used. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 2 channels that can be found. Please refer to power management for SOT-23-8 functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 5V-voltage supply. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 8 pins on IC management. Power managment ic pin count is 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Open Drain, Push-Pull as the output voltage. The power management's supply current is 15μA. To operate this power management, you will need at least 1.5/5V volts of power.

MAX6392KA31+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
15μA operating supply current

MAX6392KA31+T Applications

There are a lot of Maxim Integrated MAX6392KA31+T Voltage Supervisors applications.

• Power distribution systems of operating room
• Urban rail transit weak current power monitoring
• Low voltage/high power - AI, GPU
• Embedded computing
• Transformer load monitoring equipment
• Data storage applications
• Leakage current detection
• Medical-specific insulation monitor
• Digitally controlled LDO regulators circuit
• Radio