MAX6394US240D3+T

MAX6394US240D3+T Overview

As you can see, this power management is mounted through 4 terminals. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find TO-253-4, TO-253AA functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 4 pins in it. 4 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. You can always use MAX6394, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature that PMIC chip can work with is 15μA.

MAX6394US240D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MAX6394US240D3+T Applications

There are a lot of Maxim Integrated MAX6394US240D3+T Voltage Supervisors applications.

• Insulation fault location system
• Computer applications
• Detection of phase sequence
• Urban rail transit weak current power monitoring
• Medical-specific isolation transformer
• WiFi router
• Analog circuit
• Cloud computing
• Battery cars
• Power distribution systems of ICU