MAX6412UK22+T

MAX6412UK22+T Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 5 pins are present in total in this power management. There are 5 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 2.7μA. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use MAX6412, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6412UK22+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.7μA operating supply current

MAX6412UK22+T Applications

There are a lot of Maxim Integrated MAX6412UK22+T Voltage Supervisors applications.

• Military electronics
• Power distribution systems of infant care room
• Medical-specific isolation transformer
• Detection of phase loss
• Battery cars
• Smartphones
• FPGA design
• DSP
• DVR
• Household appliances