MAX6420UK31+T

MAX6420UK31+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 2 channels. IC management is packaged as a SC-74A, SOT-753 package. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 2. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 2.7μA for the power management. There are other features such as RESET THRESHOLD VOLTAGE IS 3V to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6420, which is the base power ics number.

MAX6420UK31+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
2.7μA operating supply current

MAX6420UK31+T Applications

There are a lot of Maxim Integrated MAX6420UK31+T Voltage Supervisors applications.

• Radio
• Urban rail transit weak current power monitoring
• Military communications
• Electrical fire monitoring system
• Battery cars
• DVR
• Detection of phase sequence
• Smartphones
• Power distribution systems of infant care room
• Telecommunications equipment