MAX6423US23+T

MAX6423US23+T Overview

A total of 4 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached TO-253-4, TO-253AA functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 4 pins on the board. 4 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 2.5μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6423.

MAX6423US23+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current

MAX6423US23+T Applications

There are a lot of Maxim Integrated MAX6423US23+T Voltage Supervisors applications.

• Detection of phase imbalance
• Electronics installed in the vehicle
• Microprocessor system
• Radar
• WiFi router
• Medical-specific insulation monitor
• Power distribution systems of ICU
• Magnetic resonance imaging
• Refrigeration
• Functional modules