MAX6423US46+T

MAX6423US46+T Overview

As you can see, this power management is mounted through 4 terminals. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of TO-253-4, TO-253AA functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 5V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 4 pins in it. Pin count of the power management is 4. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supply current of the power management is 2.5μA. A similar IC managements number of the manufacturer can always be found by using MAX6423, the base power ics number.

MAX6423US46+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current

MAX6423US46+T Applications

There are a lot of Maxim Integrated MAX6423US46+T Voltage Supervisors applications.

• Magnetic resonance imaging
• Rechargeable batteries
• Satellite navigation
• Sensitive sensors
• emergency room
• Leakage protection
• Important electronics for automotive protection
• Smart meter
• Detection of phase sequence
• DC stabilized power supply module