MAX6464XR39+T

MAX6464XR39+T Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When 3.6V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. In total, the power management has 3 pins in it. 3 pins make up the power management. IC management can only work with a supply voltage of 1.2V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 3.5μA. You can always use MAX6464, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 3.5μA at the most.

MAX6464XR39+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current

MAX6464XR39+T Applications

There are a lot of Maxim Integrated MAX6464XR39+T Voltage Supervisors applications.

• Cloud computing
• Leakage protection
• Transformer load monitoring equipment
• Urban rail transit weak current power monitoring
• DSP
• Display equipment
• DC stabilized power supply module
• Detection of phase imbalance
• Radio
• FPGA design