MAX6709EUB+

MAX6709EUB+ Overview

There are 10 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 4 channels. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 4. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 10 pins on power management. This power management has 10 pins. Supply voltage (Vsup) should be at least 2V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 80μA. For similar manage ics search of the manufacturer, you can always refer to MAX6709, the base PMIC number. It requires 2.5/5V watts of power to operate this voltage supervisor.

MAX6709EUB+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2V
80μA operating supply current

MAX6709EUB+ Applications

There are a lot of Maxim Integrated MAX6709EUB+ Voltage Supervisors applications.

• Consumer electronics
• Utility meter
• Multi-voltage system
• Radar
• Low voltage/high power - AI, GPU
• Cloud computing
• Solar power charger
• Data storage applications
• Network equipment
• Important electronics for automotive protection