MAX6712SEXS+T

MAX6712SEXS+T Overview

Power management is mounted through 4 terminals. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are SC-82A, SOT-343 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 3.3V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 4 pins in it. 4 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 12μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6712, which is the base power ics number. The voltage supervisor requires a power source of 3.3V volts in order to work correctly.

MAX6712SEXS+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
12μA operating supply current

MAX6712SEXS+T Applications

There are a lot of Maxim Integrated MAX6712SEXS+T Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Electrical fire monitoring system
• Display equipment
• Microprocessor system
• Refrigeration
• emergency room
• Kitchen appliances
• Urban rail transit weak current power monitoring
• Satellite navigation
• Detection of phase loss