MAX6713REXS+T

MAX6713REXS+T Overview

There are 4 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SC-82A, SOT-343 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 4. This power management has 4 pins. It is recommended that Vsup should not be less than 1.2V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 12μA. You can always use MAX6713, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 3V volts of power.

MAX6713REXS+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
12μA operating supply current

MAX6713REXS+T Applications

There are a lot of Maxim Integrated MAX6713REXS+T Voltage Supervisors applications.

• Battery cars
• Magnetic resonance imaging
• Detection of phase sequence
• Radio
• Detection of phase imbalance
• Cloud computing
• Smart meter
• Battery cars
• Data storage applications
• Microprocessor system