MAX6716AUTVHD3+T

MAX6716AUTVHD3+T Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. A series of 2 channels can be found on this supervisor. Please refer to power management for SOT-23-6 functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1V-voltage supply. Power ics operate at 2 supply voltages. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 6 pins on IC management. 6 pins make up the power management. IC management can only work with a supply voltage of 800mV volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~125°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 1.575 to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX6716, the base PMIC number. There is a requirement for 1/5V power to power this power management.

MAX6716AUTVHD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6716AUTVHD3+T Applications

There are a lot of Maxim Integrated MAX6716AUTVHD3+T Voltage Supervisors applications.

• Detection of phase loss
• Consumer electronics
• Rechargeable batteries
• Refrigeration
• Power distribution systems of operating room
• Urban rail transit weak current power monitoring
• Smartphones
• DSP
• Detection of phase sequence
• Analog circuit