MAX6717AUKZGD3+T

MAX6717AUKZGD3+T Overview

It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. A series of 2 channels can be found on this supervisor. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.15V volt supply. Power ics operate at 2 supply voltages. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. 5 pins are present in total in this power management. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6717A, which is the base power ics number.

MAX6717AUKZGD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6717AUKZGD3+T Applications

There are a lot of Maxim Integrated MAX6717AUKZGD3+T Voltage Supervisors applications.

• Battery-powered equipment
• Electronics installed in the vehicle
• Dash board
• Smartphones
• Functional modules
• WiFi router
• Low voltage/high power - AI, GPU
• Electric heating appliances
• Solar power charger
• Personal computers