MAX6719UTTZD3+T

MAX6719UTTZD3+T Overview

There are 6 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 3 channels on this power managment ic that can be found in a series. Please find attached SOT-23-6 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. When 3 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. A total of 6 pins are located on this power management. This power management has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6719, the base power ics number. There is a requirement for 1/5V power to power this power management.

MAX6719UTTZD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6719UTTZD3+T Applications

There are a lot of Maxim Integrated MAX6719UTTZD3+T Voltage Supervisors applications.

• Radio
• Electrical fire monitoring system
• FPGA design
• Insulation fault location system
• Detection of phase sequence
• Linux and server computing
• Magnetic resonance imaging
• Household appliances
• Low voltage/high power - AI, GPU
• Detection of phase imbalance