MAX6730UTTD3+T

MAX6730UTTD3+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are SOT-23-6 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During the reflow process, a peak temperature of 260 is specified for the package. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 4μA. It is always advisable to use MAX6730, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6730UTTD3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
4μA operating supply current

MAX6730UTTD3+T Applications

There are a lot of Maxim Integrated MAX6730UTTD3+T Voltage Supervisors applications.

• Microcontroller system
• DSP
• Microprocessor system
• Cloud computing
• Electronics installed in the vehicle
• Detection of phase imbalance
• Transformer load monitoring equipment
• Important electronics for automotive protection
• Military electronics
• Functional modules